MAINTENANCE FORMS, RECORDS, AND REPORTS

TM 10-4110-262-13&P

0001 00

MAINTENANCE FORMS, RECORDS, AND REPORTS

Department of the Army forms and procedures used for equipment maintenance will be those prescribed

by(as applicable) DA PAM 738-750, Functional Users Manual for the Army Maintenance Management

System (TAMMS); DA PAM 738-751, Functional Users Manual for the Army Maintenance Management

Systems - Aviation (TAMMS-A); or AR 700-138, Army Logistics Readiness and Sustainability.

REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)

If your ADR-300 needs improvement, let us know. Send us an EIR. You, the user, are the only one who

can tell us what you do not like about your equipment. Let us know why you don't like the design or

performance. Put it on an SF 368 (Product Quality Deficiency Report). Mail it to the address specified in

DAPAM 738-750, Functional Users Manual for the Army Maintenance Management System (TAMMS) or

as specified by the acquiring agency. We will send you a reply.

CORROSION PREVENTION AND CONTROL (CPC)

Corrosion prevention control (CPC) of military materiel is a continuing concern. It is important that any

corrosion problems with this item be reported so that the problem can be corrected and improvements

can be made to prevent the problem in future items.

While corrosion is typically associated with rusting metals, it can also include deterioration of other

materials, such as rubber or plastic. Unusual cracking, softening, swelling or breaking of these materials

may be a corrosion problem.

If a corrosion problem is identified, it may be reported using SF 368, Product Quality Deficiency Report.

Use key words such as corrosion, rust, deterioration, or cracking will ensure that the information is

identified as a CPC problem. This form should be submitted to the address specified in DA Pam

738-750.

DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE

For procedures to destroy this equipment to prevent its use by the enemy, refer to TM 750-244-3,

Procedures for Destruction of Materiel to Prevent Enemy Use.

PREPARATION FOR STORAGE OR SHIPMENT

See shipment and movement sections (Work Package 0005 00) for procedures that ensure safe

movement and shipment of the ADR-300.

WARRANTY INFORMATION

The ADR-300 is warranted for one year. The warranty starts on the date found in block 23 of DA Form

2408-9, Equipment Control Record. Report all defects to your supervisor, who will take appropriate

action.

The basic warrantee includes all parts and labor and shall (at a minimum) warrantee the ADR-300

comprised of an ADR/IC and an ADR/RU to be free from defects in material, workmanship, design, and

essential performance characteristics.

0001 00-2