Loading the ADR-300

TM 10-4110-262-13&P

0005 00

Loading the ADR-300

WARNING

Do not fly cargo on an internal aircraft if the pallet base is structurally

damaged. ADR-300 could shift during flight. Failure to comply may

result in serious injury or death to personnel.

CAUTION

Do not exceed the designated weight limit. The container's gross

weight should never exceed 10,000 pounds (4,536 kg). Failure to

comply may cause damage to the container or cargo handling

equipment.

The ADR-300 may be used to transport a wide range of cargoes that require refrigeration. Cargo may be

transported on the interior shelves or the shelves may be removed/adjusted to accommodate larger bulk

items. To remove or install the shelves, see Work Package 0015 00. Ensure the cargo restraint rail is not

damaged prior to loading.

If cargo is to be shipped on shelves:

1. Make sure the total weight supported by any single shelf does not exceed 300 pounds.

2. Cargo should not touch the container walls. It should be located more than one inch from any outside

wall to permit air circulation on all sides of the load.

3. Make sure the weight on each shelf is distributed over as much of the shelf area as possible.

4. If the shelf load is concentrated in one place, place that item as close as possible to one end of the

shelf.

5. Restrain all items with straps, ropes or other appropriate restraints to prevent movement in any

direction.

If cargo is to be shipped in bulk:

1. Make sure the total cargo weight does not exceed 3,600 pounds (1,634 kg) on the floor.

2. Load the cargo on the container floor so that it does not touch the container outside walls.

3. Restrain the cargo with straps, ropes or other suitable devices coupled to the tie-down rings at the

perimeter of the floor.

0005 00-12