REMOVE - TM-10-4110-262-13-P0128

TM 10-4110-262-13&P

0022 00

WARNING

Do not fly cargo on an internal aircraft if the pallet base is structurally

damaged. ADR-300 could shift during flight. Failure to comply may

result in serious injury or death to personnel.

WARNING

Be careful to keep toes, hands and other appendages

out from under the ADR-300 when it is lifted off the

ground. The system may weigh up to 10,000 pounds

and may crush hands, feet or other appendages.

Failure to comply may result in serious injury to

personnel.

NOTE

It may be necessary to lift the container slightly with a forklift or dunnage

and pry bar to facilitate removal of the cargo restraint rails.

REMOVE

1. Remove all (12 for short rail, 14 for long rail) bolts and lock washers from the rail to be removed.

2. Remove the rail from container base.

INSTALL

1. Position the rail next to the container base with the notched edge on the ground and away from the

container.

2. Confirm that the bolt holes on the rail match the threaded holes on the container base and the cutout

regions of the rail correspond to the forklift pockets on the container.

3. Insert 3/8-24 x 1.375 bolts (12 for short rail, 14 for long rail) and lock washers in each of the bolt holes

and thread them into the threaded holes in the container.

4. Tighten bolts securely but do not strip threads. If the threads are stripped, remove the rivnut.

0022 00-2