REMOVE - TM-10-4110-262-13-P0154

TM 10-4110-262-13&P

0026 00

REMOVE

Door Seal

1. Remove the old door seal by peeling it from the door inside and outside surfaces.

NOTE

The seal is glued only to the inside and outside surfaces and not to the

edges of the door.

2. To assist in separating the seal from the door surface, insert a knife or other flat tool between the seal

and the door (see figure). Take care to avoid scratching or otherwise damaging the door surface.

3. Remove all remnants of the old seal and adhesive by scraping or sanding the door surfaces. Take

care not to gouge or otherwise damage the painted surface or the inside door skin.

4. Wipe down the door edge to remove all particles and dust.

Door Seal

Knife inserted between

seal and door

0026 00-2