|
| |
TM 10-4130-239-14
4-25.
ENGINE ASSEMBLY REMOVAL (CONT)
7.
Cut large tie strap holding power cable to oil drain elbow.
8.
Remove four engine mounting bolts, nuts, lockwashers, eight
flatwashers and ground cable from STARTER connection.
9.
Slide engine back free of fan shroud and remove from water
chiller base.
10. Remove fan assembly (para 4-22).
11. Remove centrifugal clutch (para 4-23).
1.
2.
3.
4.
Install centrifugal clutch (para 4-23).
Install fan assembly (para 4-22).
Place engine on water chiller base and slide forward
mounting bolt holes.
Install four engine mounting bolts, nuts, lockwashers,
flatwashers, and ground cable from STARTER connection
to align
eight
4-40
|
