| |
TM 10-4130-239-14
4-27.
CARBURETOR AND INTAKE MANIFOLD REPLACEMENT (CONT)
2.
Remove mounting bracket and screws.
3.
Remove air cleaner housing, gasket, intake tube and two breather
tubes as one assembly.
CAUTION
Do not pull lines at an angle or breakage of fuel
pump body connectors may occur.
4.
Disconnect fuel and vacuum lines.
5.
Unbolt control rod bracket.
Remove control rod and control rod
bracket.
6.
Remove one bolt attaching starter panel assembly to fan housing
to allow removal of one screw in step 7.
4-45
|