|
| |
TM 10-4130-239-14
5-23.
WATER SYSTEM LEAK TEST (CONT)
2.
3.
4.
5.
Remove 16 bottom plate mounting screws.
Remove bottom plate.
Clean threads in skid with tap.
Place shipping plugs in COOL RECIRCULATE and COOL DISPENSE
connections.
Close cam arms.
Connect shop water source to WARM IN connection.
Turn on water.
Check all fittings for leaks.
Remove foam
leak.
as necessary to locate
6.
After 3 minutes turn off water.
Remove shop water source from
WARM IN connection.
Remove shipping plugs from COOL RECIRCULATE
and COOL DISPENSE connections.
Set water chiller on base and
allow water to drain.
5-53
|
