|
| |
TM 10-4130-239-14
6-2.
CYLINDER BLOCK ASSEMBLY REPAIR (CONT)
WARNING
l
Solvent may cause toxic fumes.
To prevent
personal injury, work only in well-ventilated
area.
DO NOT breathe fumes for a long time.
l
Solvent is flammable.
To prevent fire or
explosion, DO NOT bring open flame or sparks
near solvent.
3.
Using solvent, clean cylinders to remove carbon buildup or
foreign matter.
4.
Using solvent, clean carbon buildup from piston and grooves.
5.
Install new piston ring on top ring groove of piston.
6.
Check remaining space in groove.
If space is 0.007 in. (0.18 mm)
or greater, remove piston ring and replace piston.
7.
Repeat steps 4 through 6 for left cylinder.
8.
Obtain right connecting rod assembly.
Check crankpin bearing
size.
If greater than 1.627 in.
(41.33 mm), discard connecting
rod assembly.
6-8
|
