|
| |
TM 10-4130-239-14
2-8.
OPERATING PROCEDURE (CONT)
8 Start engine.
(See paragraph 2-8b.)
Flush water system
thoroughly, discharging water from COOL DISPENSE hose to
waste container.
Connect COOL RECIRCULATE hose to potable
water supply.
Water chiller is now ready for operation.
To prevent damage to hearing, wear hearing
protection at all times within 4 feet (1.2
meters) of water chiller.
Do not operate water chiller after shipment or
repairs until system has been purged with
disinfectant to prevent water contamination.
(See paragraph 2-8a.)
CAUTION
To prevent clogging, DO NOT operate water
chiller without strainer.
(See para 2-6, step
5.)
Failure to connect all water hoses may cause
damage to equipment.
DO NOT operate water
chiller without adequate water. supply.
NOTE
Install exhaust muffler and connect water
hoses before starting engine.
(See paragraph
2-6, step 2).
Perform before (B) PMCS.
2-22
|
