|
| |
TM 10-4130-239-14
4-16.
HOUSING REPAIR (CONT)
1. Drill out rivets.
Remove latch.
2.
3.
Install latch.
Coat stem of rivet with primer paint.
Install rivet.
4.
1. Hold top latch in open position.
bracket.
Remove top latch.
2. Hold top latch in open position.
top latch into bracket.
1. Drill out existing rivets on data
housing.
Remove mounting screw and
Install mounting screw through
plate.
Remove data plate from
2. Install data plate on housing.
Aline mounting holes.
3. Install pop rivets in mounting holes.
1. Remove existing rubber strip.
2. Cut new rubber to correct length.
Apply adhesive to one side of
rubber strip and to housing.
Install rubber strip with adhesive
side against housing.
Trim any excess.
4-22
|
