|
| |
TM 10-4130-239-14
4-17.
WIRING HARNESS REPAIR (CONT)
1. Disconnect prepare multimeter for continuity test.
2. Disconnect one end of wire.
Place red lead on one end of wire
section to be tested.
Place black lead on other end of wire
section to be tested.
3. Multimeter should display less than 1 ohm.
If it displays more
than 1 ohm, replace wire.
1. Unwrap harness cover as needed.
Remove damaged wire from wiring
harness.
2. Cut correct length of wire from bulk wire.
(See para F-3). Crimp
terminal to each end of wire.
3. Install wire in wiring harness.
Rewrap cover as needed.
4-18.
TOGGLE SWITCH S3 REPLACEMENT.
This task covers:
Testing, Removal, and Installation
Equipment
Condition
Para
Condition Description
2-8
Engine stopped.
4-15
Housing removed.
Materials/Parts:
Tools
Tool Kit, Generals
Mechanic, item 1,
Appendix B
Multimeter, item 2,
Appendix B
Tags, item 32, Appendix E
4-24
|
