|
| |
TM 10-4130-239-14
4-19.
PNEUMATIC TIMER SWITCH S8 REPLACEMENT (CONT)
3. Test
(a) Measure resistance.
Multimeter should show less than 1 ohm.
(b) Press button and measure resistance. Resistance should be
infinity.
After approximately 45 seconds, the resistance
should be less than 1 ohm.
If resistance is not correct,
replace pneumatic timer switch.
4. If switch passes test, install three wires on switch.
Remove
tags.
1. Tag and remove three wires from switch.
2. Remove mounting screws.
3. Remove switch from mounting bracket.
1. Install switch in mounting bracket.
2. Install mounting screws.
3. Install three wires on switch.
Remove tags.
4-20.
WATER PUMP DRIVEBELT REPLACEMENT.
This task covers:
Inspect, Removal, Installation, and Adjustment
Equipment
Condition
Para
Condition Description
Tools
2-8
Engine stopped.
Tool Kit, General
Mechanic’s, item 1,
4-15
Housing removed.
Appendix B
4-28
|
