Figure 4-2. Control Panel Internal Components F1000OR-6

TM 5-4110-234-14

TO 40R7-5-7-1

Belt Adjustment.

On Model F10000R-6 the fan drive belt was slackened for shipment. Do not operate the unit before

adjusting the belt.

On Model F10000RG-2 the two compressor belts and the fan belt were slackened for shipment. Do not

operate the unit before adjusting the belts.

(1) Model F10000R-6 Fan Belt. Open the left side access door. Loosen the four electric motor mounting bolts.

Slide the motor away from the center of the unit to take up belt slack. Proper tension is a deflection of 1/2 V inch (1.3 cm)

midway between pulleys. Tighten the four mounting bolts. Close and latch the door.

4-6