REMOVE/INSTALL SWITCH

TM 5-4110-240-13&P

REMOVE/INSTALL SWITCH

TOOLS: Screwdriver, flat-blade

NOTE

PRELIMINARY PROCEDURE: Switch cover removal (page 4-22).

REMOVAL:

WARNING

Disconnect power to power receptacle before beginning this procedure.

1. Remove two screws (1) and gently pull switch (2) away from wall.

2. Tag and disconnect wires (3) to rear of switch.

INSTALLATION:

1. Connect wires (3) to rear of switch and remove wire tags.

2. Position switch (2) into wall and secure with screws (1).

3. Reconnect power to power receptacle.

4-24