|
|
TM 5-4110-240-13&P
REMOVE/INSTALL CLOSURE PLUG GASKET
TOOLS: Staple Puller or Screwdriver, flat-blade
Knife, pocket
Gun, Staple
NOTE
PRELIMINARY PROCEDURE: Remove closure plug assembly (page 4-36).
REMOVAL:
1. Use screwdriver or staple puller to remove staples (1).
2. Remove and discard damaged gasket.
INSTALLATION:
1. Begin installing new gasket (2) at the bottom corner of the closure plug assembly.
2. Gasket (2) must be installed as a continuous strip around plug and end at the bottom corner where it
Cut
began.' excess after tacking end in place.
NOTE
FOLLOW-ON MAINTENANCE: Install closure plug assembly (page 4-36).
4-37
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |