|
| |
5-31. Pressure Regulator Valve
a. Removal. Refer to paragraph 6-3 and
discharge the refrigerant system. Remove housing
top covers (para 4-21 ). Refer to figure 5-10 and
remove screw, lock washer, loop clamp and spacer.
Unsolder pressure regulator valve from tubing.
b. Installation. Solder pressure regulator valve
(fig. 5-10) on tubing and install loop clamp, spacer,
screw and lock washer. Install housing top covers
(para 4-21). Refer to paragraph 6-3 and charge the
refrigerant system.
5-32. Motors
Refer to paragraph 4-38 for removal of motors and
to paragraph 4-40 for installation.
5-33. Control Module
Refer to paragraph 4-44 for removal of control
module and to paragraph 4-48 for installation.
5-18
|
