|
| |
figure 6-4
paragraph 4-45
paragraph 4-7
figure 6-5
c. Cleaning,
Inspection and Repair. C l e a n ,
inspect and repair parts as follows:
( 1 ) Clean metal parts with cleaning solvent
(Fed. Spec. P-D-680). Wipe off electrical parts
with a clean cloth.
(2) Inspect wiring for damaged insulation and
broken wiring. Repair damaged insolation.
(3) Inspect connector for damage.
(4) Inspect bearing for wear, galling or flat
spots. Replace defective bearings.
(5) Inspect shaft for gouges or worn bearing
surface. Repair minor defects.
(6). Inspect stator for damaged, broken or
shorted wiring.
6 - 9
|
