|
| |
e. Remarks. This column is provided for
referencing by codes the remarks (sec. IV) per-
tinent to the maintenance functions.
B-3. Explanation of Columns in Section III
a. Reference Code. This column consists of a
number and a letter separated by a dash. The
number references the T & TE requirements
column on the MAC. The letter represents the
specific maintenance operation the item is to be
used with. The letter is representative of columns
“A” through “J” on the MAC.
b. Maintenance Level. This column shows the
lowest level of maintenance authorized to use the
special tool or test equipment.
c. Nomenclature. This column lists the name or
identification of the tool or test equipment.
d. Tool Number. This column lists the
manufacturer’s code and part number, or Federal
Stock Number, of tools and test equipment.
B-4. Explanation of Columns in Section IV
a. Reference Code. This column consists of two
letters separated by a dash, both of which are
references to section II. The first letter references
column (5), section II and the second letter
references a maintenance operation, Column “A”
through “K”.
b. Remarks. This column lists information
pertinent to the Maintenance Operation being
performed, as indicated on the MAC section II.
Section II. MAINTENANCE ALLOCATION CHART
B-2
|
