|
| |
Section XI. HEATERS AND THERMOSTATIC SWITCH
4-34. Heater Thermostatic Switch
(2) Refer to figure 4-9 and remove switch
a. General. The heater thermostatic switch,
screws and disconnect leads from thermostatic
mounted in a bracket under the housing center
switch.
cover, protects the air conditioner from overheating
(3) Remove two screws to remove bracket and
if the heating element circuit is actuated and the air
switch from center cover.
flow is restricted or stopped.
(4) Remove two screws and lock washers and
b. Removal. Remove the switch as follows:
remove bracket.
(1) Refer to paragraph 4-21 and remove
housing front cover.
Figure 4-9. Heater thermostatic switch.
4-18
|
