|
| |
Figure 4-12. Condenser fan and motor.
(3) Disconnect motor lead electrical connector.
(6) Refer to figure 4-13 and remove setscrew
Remove wire ties as required.
(1) and collar (2) from motor shaft. Remove four
(4) Loosen setscrew in hub of fan impeller and
cap screws (3), lockwasher (4) and flat washer (5).
remove impeller from shaft of motor.
Remove motor (6) and four flat washers (7) from
(5) Remove motor and mounting plate from
mounting plate (9). Remove bushing (8) from plate
air conditioner.
only if they require replacement.
4-22
|
