|
| |
TM 5-4120-259-15
Figure 28.
STEP 2.
STEP 3.
STEP 4.
STEP 5.
STEP 6.
STEP 7.
STEP 8.
STEP 9.
INSTALL NEW COMPRESSOR BY REVERSING ABOVE ORDER OF REMOVAL.
DISCONNECT POWER AND REMOVE RIGHT SIDE PANEL (FIG. 13).
REMOVE EVAPORATOR DRAIN HOSE CONNECTOR PANEL (FIG. 26) AND
PLACE DRAIN HOSE AWAY FROM WORKING AREA.
DISCONNECT ELECTRICAL CONNECTOR AT COMPRESSOR JUNCTION
BOX AND PLACE ELECTRICAL CABLE AWAY FROM WORKING AREA.
REMOVE TAPE FROM SUCTION LINE TUBING AND PLACE VALVE SAMPLING
TUBE TO ONE SIDE, TAKING CARE NOT TO KINK THE TUBING.
UNBRAZE TUBING AT REMOVAL POINTS INDICATED (SEE PAR. 96).
REMOVE COMPRESSOR TRAY FROM FRAMING.
REMOVE COMPRESSOR FROM TRAY.
PREPARE NEW COMPRESSOR FOR INSTALLATION (PAR. 99).
CAUTION:
OBSERVE PARAGRAPH 96 WHEN MAKING REFRIGERANT CONNECTIONS.
43
|
