TM 5-4120-287-15 (4) Refer to figure 5-6 and remove con- denser assembly. b. Installation. (1) Refer to figure 5-6 and install con- denser assembly by performing steps in re- verse order. (2) Charge the refrigerant system (para 7-8 and 7-9). (3) Refer to figure 34 and install con- denser air inlet filter. (4) Install air conditioner right-side ac- cess panel assembly (para 3-29 b and c). 5-25. Heater Assemblies a. Removal. Refer to figure 5-7 and re- move heater assemblies. b. Installation. Refer to figure 5-7 and install heaters by performing steps in reverse order. 5-26. Mist Eliminator Assemblies a. Removal. (1) Remove heater assemblies (para 5-25 a). (2) Refer to figure 58 and remove mist eliminator assemblies. b. Installation. (1) Refer to  figure 58 and install mist eliminator by performing steps in reverse order. (2) Install heater assemblies and condi- tioned air outlet screen (para 5-25 b). 5-11 5-27. Evaporator Assembly a. Removal. (1) Discharge and purge the refrigerant system (para 7-7 and 7-8). (2) Remove evaporator air inlet filter (para 3-32 a). (3) Remove mist eliminator (para 5-26 a). (4) Remove electrical tray assembly (para 5-19 a). (5) Remove the four evaporator assem- bly base retaining bolts, located at the rear top wall of the electrical tray recessed cabinet chamber. (6) Refer to figure 5-9 and remove the evaporator assembly. b. Installation. (1) Refer to figure 5-9 and install evaporator assembly by performing steps in reverse order. (2) Install the four evaporator assembly base retaining bolts through the electrical tray recessed cabinet chamber. (3) Install electrical tray assembly (para 5-19 b). (4) Install mist eliminator (para 5-26 b). (5) Install evaporator air inlet filter (para 3-32 a). (6) Charge the refrigerant system (para 7-9). 5-28. Refrigerant System Components Refer to chapter 7 for removal and installation instructions of refrigerant system components.