|
| |
STEP 1.
POSITION THERMOSTAT FOR DESIRED TEMPERATURE.
STEP 2.
PLACE ROTARY SWITCH ON COOL POSITION FOR COOLING OPERATION,
ON LO HEAT OR HI HEAT POSITIONS FOR HEATING OPERATION, OR ON
VENTILATE POSITION FOR VENTILATING OPERATION.
Figure 2-6. Starting instructions.
2-15. Operation Under Rainy or Humid
2-16. Operation in Salt Water Areas
Wash the exterior of the unit with clean fresh
Conditions
If the unit is outside and not operating, protect it
water at frequent intervals. Coat exposed metal
with a canvas or waterproof cover, Remove cover
surfaces with rust-proofing material. Remove cor-
during dry periods. Open front access cover to
rosion, and paint exposed metal surfaces. Keep
allow unit to dry before operating. Use caution
electrical connections dry.
with operating electrical equipment.
2-10
|
