|
| |
3-9. Condenser Discharge Grille
a. Removal. Refer to figure 3-4 and remove the
condenser discharge grille.
b. Cleaning and Inspection.
(1) Clean the grille with an approved cleaning
solvent and dry thoroughly.
(2) Inspect for breaks, cracks, dents, loose or
missing mounting hardware or other defects.
(3) Replace a damaged condenser discharge
grille as necessary.
c. Installation. Refer to figure 3-4 and install
condenser discharge grille.
3-10. Condenser Intake Grille
a. Removal. Refer to figure 3-4 and remove the
condenser intake grille.
b. Cleaning and Inspection.
(1) Refer to paragraph 3-9 b (1) and use same
procedure to clean intake grille.
(2) Refer to paragraph 3-9 b (2) and use same
procedure to inspect intake grille.
(3) Replace a
damaged condenser intake
grille as necessary.
c. Installation. Refer to figure 3-4 and install
condenser intake grille.
3-10
|
