CASING ASSEMBLY - TM-5-4120-339-140074

TM 5-4120-339-14

(2) Refer to figure 3-13 and partially remove the junction box.

(3) Refer to figure 3-25 and inspect the external area of the compressor for obvious defects. If such defects

are found, report the condition to Direct Support Maintenance.

(4) If no such defects are found, refer to figure 3-13 and install the junction box and refer to figure 3-3 and

install the front access panel.

3-14.

CASING ASSEMBLY. Maintenance at the organizational level is limited to inspection of the casing assembly.

a. Refer to figure 3-3 and remove the front access panel, evaporator intake grille, evaporator discharge grille, air

filter, air conditioner cover, top panel, condenser fan guard and condenser coil guard.

b. Inspect the casing assembly for damage which would impair serviceability.

If such damage is found, report the condition to Direct Support Maintenance.

d. If no such damage is found, refer to figure 3-3 and install the front access panel, evaporator intake grille,

evaporator discharge grille, air filter, air conditioner cover, top panel, condenser fan guard and condenser coil guard.

3-50