 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-341-13
ACTION
REMARKS
LOCATION/lTEM
INSPECTION AND SERVICE
HOUSING INTERIOR
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin
contact Do not use near open flame or excessive heat Flash point o solvent
is 100 F (38 C).
WARNING
Do not use compressed air for cleaning purposes except where reduced to
less than 30 psi and then only with effective chip guarding and personal
protective equipment
a.
Inspect condenser coil for cleanliness.
2. Condenser Coil
b.
Scrub the external portion of condenser coil
with a stiff bristle brush to remove scale and
corrosion.
c.
Use low pressure compressed air to blow out
loose material.
d.
Wipe condenser coil with a cloth moistened
w i t h d r y cleaning solvent, specification
P-D-680 or P-S-661.
e.
Inspect condenser coil for leaks.
f.
Straighten bent fins.
Report damaged condition to direct support
9.
maintenance personnel.
REAR OF HOUSING
a.
Align holes in rear panel with holes in
3. Rear Panel
housing.
b.
Secure rear panel with fourteen (14) screws
4-84
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals