FRONT EVAPORATOR COVER

TM 5-4120-359-14

3-17. FRONT EVAPORATOR COVER

Preliminary Procedure: Remove air conditioner from shelter. (See paragraph 3-6.)

Figure 3-11. Front Evaporator Cover

a. Removal

(1) Using screwdriver, remove eight screws from the outside edges while supporting (holding) cover.

(2) Carefully slip front cover out and down so that the radio frequency filter can be supported (held) while it is

removed.

(3) Using screwdriver, remove four screws from the radio frequency filter. The protective cap and cover for the

electrical connectors will come off when the top two screws are removed. Take care that they are not lost.

3-28