EVAPORATOR FAN (IMPELLER) AND MOTOR ASSEMBLY REMOVAL AND INSTALLATION

TM 5-4120-359-14

4-21. EVAPORATOR FAN (IMPELLER) AND MOTOR ASSEMBLY REMOVAL AND INSTALLATION

Preliminary Procedure: Remove top evaporator cover. (See paragraph 3-21.)

a. Removal

(1) Disconnect P2A, P3, P4, and P6 connector plugs.

Figure 4-13. Evaporator Electrical Module Assembly Removal/installation

(2) Using screwdriver, loosen the two evaporator section electrical module mounting screws.

(3) Lift the electrical module up and out of the way.

(4) Using socket and ratchet, remove the eight hex head cap screws, lock washers, and flat washers from the

front face of the fan assembly.

4-50