Figure 4-53. Relay (K3, K4 and K5)

TM 5-4120-359-14

Figure 4-53. Relay (K3, K4 and K5)

NOTE

The following instructions apply to all three K3, K4, and K5 relays.

b. Inspect

(1) Check for loose terminal connections. Repair or replace all loose connections.

(2) Check relays for cracks, evidence of overheating and other visible damage. Replace if damaged.

Removal

(1) Tag leads.

(2) Using flat tip screwdriver, remove screws and washers holding leads to relay terminals.

(3) Using cross tip screwdriver, remove four screws and lock washers that hold relay.

(4) Remove relay.

4-114