TUBING AND FITTINGS (CONDENSER ASSEMBLY)

TM 5-4120-359-14

Follow-on Procedures: 1. Install left end condenser cover. (See paragraph 3-27.)

2. Install top condenser cover. (See paragraph 3-25.)

3. Install the air conditioner on shelter. (See paragraph 3-6.)

4. Connect power.

4-86. TUBING AND FITTINGS (CONDENSER ASSEMBLY)

The condenser assembly contains a number of pieces of copper tubing in a variety of material grades, sizes, lengths, and

shapes and a number of elbows, tees, and adapters. Observe the following when replacing any piece of tubing or fitting

in the system:

Preliminary Procedures:

1. Remove air conditioner from shelter. (See paragraph 3-6.)

2. Remove covers and parts as necessary to have access to repair area.

Figure 4-88. Refrigeration Piping, Condenser Section

4-175