Figure 4-99. Terminal Board (TB3) and Connecting Links

TM 5-4120-359-14

Figure 4-99. Terminal Board (TB3) and Connecting Links

(3) Check terminal board for loose or corroded terminals, cracks, and obvious damage. Replace if terminals are

corroded, or if terminal board is cracked or broken.

(4) Check that terminal links are in place and in good condition. Terminals 1 and 2, 3 and 4, 6 and 7, 8 and 9,

and 10 and 11 should be jumped with terminal links.

Removal

(1) Tag wires.

(2) Use flat tip screwdriver to remove terminal board nuts and remove leads and jumpers.

4-199