|
| |
TM 5-4120-361-14
b.
Installation.
Refer to figure
b.
Service Fresh Air Filter.
Flush
4-1 and install evaporator inlet and
the-filter (in the damper door vent
outlet louvers.
screen pocket) with clear water and dry.
NOTE
4-8.
Damper Door Vent Screen and Fresh
Air Filter.
The fresh air filter is a 1/2-
inch thick piece of cellulose
a.
Removal.
Refer to figure 4-5 and
sponge 4 inches wide and 6
remove damper door vent screen with fil-
inches long, inserted into the
ter.
vent door screen.
NOTE :
DO NOT REMOVE FRESH AIR FILTER FROM SCREEN POCKET -- FLUSH FILTER WITH CLEAN
WATER AND DRY THROUGHLY.
Figure 4-5.
Damper door vent screen and fresh air filters, removal and installation
c. Installation.
Refer to figure
4-5 and install vent door screen with
filter.
4-9.
Mist Eliminator.
a.
Removal.
(1) Refer to figure 4-4 and remove
top front cover.
(2) Refer to figure 4-6 and lift
out mist eliminator.
b.
Inspection and Service.
(1) Inspect the face area of the
mist eliminator for breaks, or any other
physical damage, and clogged areas.
(2) Although the mist eliminator
should not require any service normally,
it may become clogged and dirty.
The
cleaning procedure is the same as for
servicing the fresh air filter (para
4-3).
4-5
|
