Dry cleaning solvent P-D-680 or P-S-661, used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of solvent
is 100F (38C).
Do not use compressed air for cleaning purposes except where reduced to
less than 30 psi and then only with effective chip guarding and personal
2. Condenser Coil
a. Inspect condenser coil for cleanliness.
b. Scrub the external portion of condenser coil with a stiff
bristle brush to remove scale and corrosion.
c. Use low pressure compressed air to blow out loose material.
d. Wipe condenser coil with a cloth moistened with dry cleaning
solvent, specification P-D-680 or P-S-661.
e. Inspect condenser coil for leaks.
f. Straighten bent fins.
g. Report damaged condition to direct support maintenance
REAR OF HOUSING
a. Align holes in rear panel with holes in housing.
3. Rear Panel
b. Secure rear panel with fourteen (14) screws.