|
| |
TM5-4120-375-14
WIRING HARNESS (CONT.)
LOCATION/ITEM
ACTION
REMARKS
INSPECTION
8.
Main Wiring Harness
a.
Inspect for damage.
b.
Repair or replace if’ damaged.
TEST
9.
Main Wiring Harness
a.
b .
c .
Using a multimeter test for continuity between
connectors and accordance with wire list
(Appendix E).
Continuity does not exist. the wiring harness is
defective.
Repair or replace if defective.
NOTE
Assure that the grommet is installed properly
pan. Seal the grommet to the evaporator drain
in the evaporator drain
pan with sealant.
4-92
|
