|
| |
TM5-4120-376-14
4-17. EVAPORATOR FAN MOTOR AND HOUSING ASSEMBLY/Inspect, Service, Test, Repair,
Replace (Cont)
LOCATION/ITEM
Installation:
10. Connect electrical connector P-3 (14).
11. Align and install two clamps (20) around wiring harness (21) with holes in housing and
secure with two screws (17) two lock washers (18) and two flat nuts (19).
12. Align outer brackets (13) inner bracket (12) front brackets (11) and align front brackets
(11) with holes in inner brackets (12) and outer brackets (13) with holes in evaporator assembly
pan.
13. Secure brackets to evaporator assembly pan with four screws (15) four lock washers (16)
eight screws (9) and eight lock washers (10).
4-70
|
