|
| |
TM5-4120-376-14
4-18. VENTILATION DAMPER AND ACTUATOR/Inspect, Service, Replace (Cont)
LOCATION/ITEM
Removal:
3. Remove ten screws (7) ten lock washers (8) and front louver (evaporator inlet) (9) from
housing.
4. Remove condenser fan motor assembly in accordance with paragraph 4-16, page 4-54.
5. Remove seven screws (10) seven lock washers (11) securing cover (12) to unit.
6. Remove one screw (13) one lock nut (14) door cable (15) from damper door (16).
7. Slide door shaft (17) out of door bracket (18) and remove damper door (16).
4-73
|
