|
| |
TM5-4120-376-14
4-18. VENTILATION DAMPER AND ACTUATOR/Inspect, Service, Replace (Cont)
LOCATION/ITEM
Installation:
18. Align front louver (evaporator inlet) (9) with holes in unit and secure housing
screws (7) and ten lock washers (8).
19. Install condenser fan motor housing in accordance with paragraph 4-16, page
with ten
4-58.
20. Align rear cover (4) with holes in center cover (6) and secure to unit with fourteen screws
(5) to unit.
21. Align fabric cover (3) with holes in housing and secure with three screws (1) and three
lock washers (2).
4-77
|
