|
| |
TM5-4120-376-14
4-22. JUNCTION BOX AND CONTROL MODULE ASSEMBLY/Inspect, Test, Replace (Cont)
LOCATION/ITEM
JUNCTION BOX
Removal:
1. Remove
2. Remove
3. Remove
4. Remove
5. Remove
from housing.
three screws (1) and three lock washers (2) and fabric
fourteen screws (5) and rear cover (4) from housing.
fourteen screws (7) and front cover (8) from housing.
seven screws (9) and center cover from housing.
cover (3) from housing.
ten screws (10) and ten lock washers (11) and front louver (evaporator inlet) (12)
Control Module
1. Remove two screws (13) two lock washers (14) and two clamps (15) securing thermostat
sensor bulb (16) to left evaporator fan housing assembly (17).
2. Remove thermostat sensor bulb (7) from left evaporator fan housing assembly (17).
4-107
|
