|
| |
TM5-4120-376-14
4-22. JUNCTION BOX AND CONTROL MODULE ASSEMBLY/Inspect, Test, Replace (Cont)
LOCATION/ITEM
Removal:
Relay K4 and Relay K5 Assembly
1. Remove three lock nuts (57) and three flat washers (58) securing relay (59) K4 and KS
assembly to junction box.
2.
3.
4.
Remove relay K4 and relay KS assemblies.
Unsolder wires from terminals connecting relay K4 to relay K5 and tag wires.
Unsolder wires from terminals connecting relays to wire harness and tag wires.
Relay K1
1. Remove four screws (60) and four flat washers (61) securing relay K1 (62) to junction box.
2. Tag and remove wires from terminals.
3. Remove relay K1.
Relay K8
1. Remove four screws (63) and four lock nuts (64) securing relay K8 (65) to junction box.
2. Tag and remove wires from terminals.
3. Remove relay K8.
Connector With Leads J-1
1. Remove four screws (66) four flat washers (67) identification
and four lock nuts (70) securing wiring harness (71) and gasket (72)
2. Tag and remove wires from terminals.
3. Remove wiring harness.
Connector With Leads J-2
tag (68) connector
to junction box.
cover (69)
1. Remove one screw (73) one flat washer (74) one lock washer (75) and one nut (76) securing
ground wires to junction box.
2. Tag and remove wires.
4-112
|
