|
| |
TM5-4120-376-14
4-22. JUNCTION BOX AND CONTROL MODULE ASSEMBLY/lnspect, Test, Replace (Cont)
LOCATION/ITEM
Installation:
Front Louver
1. Align front louver (12) with holes in housing and secure with ten screws (10) and ten lock
washers 11).
2. Align center cover (6) with holes in housing and secure with seven screws (9).
3. Align front cover (8) with holes in center cover and housing and secure with fourteen
screws (7).
4. Align rear cover (4) with holes in center cover and housing and secure with fourteen
screws (5).
5. Align fabric cover (3) with holes in housing and secure with three screws (1) and three lock
washers (2).
4-121
|
