|
| |
TM5-4120-376-14
4-23. AMBIENT THERMOSTAT AUXILIARY POWER INLET/Inspect, Test, Repair, Replace
(Cont)
LOCATION/ITEM
Removal:
3. Remove fourteen screws (7) and front cover (8) from housing.
4. Remove seven screws (9) and center cover from housing.
5. Remove condenser fans and support assembly in accordance with paragraph 4-15, page
4-39.
6. Disconnect electrical connector (P-9) (10).
7. Remove two lock washers (11) and two screws (12) securing ambient thermostat switch
assembly (S-7) (13) to housing.
8. Remove two screws (14) two lock washers (15) and two clamps (16) from housing.
4-123
|
