|
| |
TM5-4120-376-14
4-26. HOUSING ASSEMBLY/Repair, Replace (Cont)
LOCATION/ITEM
Installation:
1. Align louver assembly (21) with holes in condenser fan housing and secure louver assembly
to condenser fan housing with four screws (20).
2. Align inlet ring (venturi) (19) with holes in condenser fan housing and secure with four
screws (17) and four flat washers (18).
3. Align condenser fan housing assembly with holes in bulkhead and housing and secure
condenser fan housing assembly to bulkhead with two screws (15) and two lock washers (16).
4. Secure condenser fan housing assembly to housing with thirteen screws (12) and thirteen
lock washers (13).
5. Replace receiver in accordance with paragraph 5-21, page 5-57.
6. Replace accumulator in accordance with paragraph 5-22, page 5-71.
4-168
|
