|
| |
TM5-4120-376-14
5-17. CONDENSER FAN SUPPORT (’’X”) ASSYS/Replace
This Task covers:
a. Removal
b. Replace
c. Installation
INITIAL SETUP
Replace maintenance function
Tasks.
Disconnect Power
Tools
TOOL KIT (SC 5180-90-CL-N18)
is done by Removal/Installation Maintenance
LOCATION/ITEM
MOTOR SUPPORTS
Removal:
1. Remove three screws (1) and three lock washers (2) and fabric cover (3) to rear cover (4)
from housing.
2. Remove fourteen screws (5)
and rear cover (4) to center cover
(6) from housing.
5-21
NOTE
|
