|
| |
TM5-4120-376-14
3-4. TOP COVERS AND FRONT LOUVERS/Inspection, service, Adjustment (Cont)
LOCATION/ITEM
LOUVERS, FRONT (GRILLES)
Indpect:
1. Inspect Evaporator Discharge Louver (1) and Evaporator Inlet Louver (2) for damage.
2. If damaged notify Organizational Maintenance.
WARNING
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of solvent
is 100°F (38°C).
Service:
1. Brush off loose dirt or foreign matter from Evaporator Discharge Louver (1) and
Evaporator Inlet Louver (2).
2. Wipe louvers with a cloth dampened with dry cleaning solvent (Table D-1, Item 3).
3-10
|
