|
| |
TM5-4120-376-14
3-5. CONDENSER GUARD, COVERS, VENTILATION AIR FILTER AND LIFTING
RINGS/Inspect, Service (Cont)
LOCATION/ITEM
Service:
1. Brush off loose dirt or foreign matter from Condenser Coil Guard (1).
2. Wipe Condenser Guard (1) with a cloth dampened with dry cleaning solvent (Table D-1,
Item 3).
VENTILATION GUARD
1. Inspect Ventilation Guard (1) for damage.
2. If damaged notify Organizational
Maintenance.
WARNING
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of solvent
is 100°F (38°C).
Service:
1. Brush off loose dirt or foreign matter from Ventilation Guard (1).
2. Wipe guard with cloth dampened with dry cleaning solvent (Table D-1, Item 3).
3-13
Inspect:
|
