|
| |
TM5-4120-376-14
4-13.
TOP COVERS, AND FRONT LOUVERS/Inspect, Service, Replace (Cont)
LOCATION/ITEM
Service:
3. Hold filter horizontal and tap each edge on bench or floor to ensure all water is removed.
4. Apply a very light coat of SAE oil (Table D-1, Item 9) on air inlet side of air filter. Drain
filter for eight hours.
5. Wipe off excess oil.
Installation:
NOTE
Air flow arrows on filter point inward toward fan intake.
1. Slide air conditioning filter (4) into end of front louver (evaporator inlet) (3).
2. Align front louver (evaporator inlet) (3) and air conditioner filter with holes in housing and
secure ten screws (1) and ten lock washers (2) to housing.
4-33
|
