|
| |
TM5-4120-376-14
4-15. CONDENSER FANS, AND SUPPORT ASSEMBLIES/Inspect, Service, Replace (Cont)
LOCATION/ITEM
Removal:
6. Disconnect electrical connectors
P-4 (22) and P-5 (23) from the bulkhead.
7. Remove four screws (24) four lock
washers (25) and left condenser fan
motor assembly (26) from condenser fan
support (27).
8. Loosen set screw (28) on left
collar (29), and set screw (30) on left
impeller (31).
NOTE
Note the position and number of impeller blades on left and right sides
condenser fan assembly on removal, and be sure to replace it in the same
position.
9. Slide left impeller (31) and left collar (29) off motor shaft.
4-41
|
