|
| |
TM5-4120-376-14
4-15. CONDENSER FANS, AND SUPPORT ASSEMBLIES/Inspect, Service, Replace (Cont)
LOCATION/ITEM
Installation:
9. Align and secure right condenser fan motor (38) with holes in condenser fan motor
mounting bracket (44) with four bolts (40) four lock washers (41) eight flat washers (42) and four
bushings (43).
10. Place right impeller (4-blades) (35) into right condenser fan housing.
11. Align and secure right condenser fan motor (38) with holes in condenser fan support (39)
with four screws (36) and four lock washers (37) on shaft.
12. Slide and tighten right collar (33) with set screw (32) and right impeller (35) with set screw
(34) on motor shaft (45).
4-48
|
