|
| |
TM 5-4120-377-14
4-21.
CONNECTOR COVER PLATES
Figure 4-25.
Connector Cover Plates
There are four connector cover plates on the air conditioner casing. See installation instructions (para 4-9) for
additional information.
a. Removal
(1) Using screwdriver and wrench, remove four screws, lock washers, and nuts.
(2) Remove cover plate (and gasket if applicable.)
b. Inspection
(1) Check that cover is not bent, cracked, or punctured. If damaged, replace cover.
(2) Check that gasket (if applicable) is not torn or otherwise damaged. Replace gasket if damaged.
c. Installation
(1) Aline mounting holes.
(2) Using screwdriver and wrench, install cover plate (and gasket if applicable) with four screws, lock
washers, and nuts.
4-54
|
