|
| |
4-32
TM 5-4120-377-14
b. Inspection. Check that plate is not bent, cracked, or punctured.
c. Installation
(1) Using screwdriver, secure radio frequency filter to mounting plate with six screws.
(2) Using screwdriver, secure mounting plate to casing with eight screws.
Follow-on procedure: Connect power.
Preliminary procedures:
a. Removal
1. Remove top panel. (See para 4-28.)
2. Remove CBR duct cover. (See para 4-19.)
3. Remove access (service valves) cover. (See para 4-20.)
4. Remove condenser (fan) guard. (See para 4-25.)
5. Remove fresh air inlet screen. (See para 4-27.)
Figure 4-36. Rear Panel
(1) Using screwdriver, remove two screws, lock washers, and packing with retainers from refrigerant
sight glass bracket.
4-65
|
